Skip to content Skip to sidebar Skip to footer
Home / Flasher / Infinity Box / Nokia 103

Guide to Flashing Nokia 130 RM 1035 with Infinity Dongle

How To Flashing Nokia 130 (RM-1035) with Infinity Dongle / Box

Insert / Add Manual Firmware like below :
=============================
MAUI : RM-1035_ROM_eMP_10.01.11
VIVA : RM-1035_VIVA_eMP_10.01.11
LANG : RM-1035_LANG_PACK_ROM_ME_eMP_10.01.11_001
CUST : RM-1035_CUSTPACK_ROM_ME_APAC_ID_eMP_10.01.11_001
JMPT : RM-1035_JUMP_TABLE_ME_APAC_ID_eMP_10.01.11_001
=====================================================
Possible mode #1 : FullFlash [VIVA+MAUI+LANG+CUST+JMPT]
Possible mode #2 : Language Change [LANG+CUST+JMPT]

Look here how to setting with image tutorial :
gsmaceh Infinity Box
Flashing Nokia 130 RM 1035 with Infinity Box 

Flashing Log files :

Core : v2.10 , MTKx FlashEngine : v8.1

Verify files ...

MAUI : RM-1035_ROM_eMP_10.01.11

VIVA : RM-1035_VIVA_eMP_10.01.11

LANG : RM-1035_LANG_PACK_ROM_ME_eMP_10.01.11_001

CUST : RM-1035_CUSTPACK_ROM_ME_APAC_ID_eMP_10.01.11_001

JMPT : RM-1035_JUMP_TABLE_ME_APAC_ID_eMP_10.01.11_001

- > MODE : FullFlash


Dead Mode is Selected

Waiting for USB device...

1. Phone should be Off!

2. Battery must be charged and inserted! ( if not used external power )

- > If phone can't switch to BL - use battery or flash from Local mode!


--- Insert USB cable now! ---

Wait for phone...

Phone found! [ 97 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info :

BB_CPU_ID : 6260

BB_CPU_HW : CB00

BB_CPU_SW : 0000

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6260_S0001

BB_CPU_SN : B4DD62842EC3E2540A203310DB299463

BROM Protocol Version : 05

BROM Status : 0000

Comm Status : 0000

EXBL Status : Alive [ USB Load Active ]

Switch to BL done

BL Version : 01

Setting...

Setting done , result code 0x8000

Project ID : CRYSTAL.10.01.11.p2

BROM/BL stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_eMP_Crystal.fg

DA_VERIFY : 00

DA_JUMP : 00040000

DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B

DA_CSTAT : 0x5A

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV

[0] : FLASH_DIE : 00EF 0040 0016 0000

[0] : FLASH_LEN : 0x00400000

FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

SecureDecrypt : RM-1035_ROM_eMP_10.01.11

SecureDecrypt : RM-1035_VIVA_eMP_10.01.11

SecureDecrypt : RM-1035_LANG_PACK_ROM_ME_eMP_10.01.11_001

SecureDecrypt : RM-1035_CUSTPACK_ROM_ME_APAC_ID_eMP_10.01.11_001

SecureDecrypt : RM-1035_JUMP_TABLE_ME_APAC_ID_eMP_10.01.11_001

OVRLP : 000069B900000001

PHPID : CRYSTAL.10.01.11.p2

OVRLP : 00004DF900000001

DA : FORMAT_BIN

Processing Flash Pre-format

FILES : 5

SAFE_BLOCK : 04

FORMAT_BIN : Ok

ERASE_MAUI_INFO : 0x0001C000

WRITE_STYLE : DEF : 0x01 (SEQ)

Write : RM-1035_ROM_eMP_10.01.11

Write : RM-1035_LANG_PACK_ROM_ME_eMP_10.01.11_001

Write : RM-1035_CUSTPACK_ROM_ME_APAC_ID_eMP_10.01.11_001

Write : RM-1035_JUMP_TABLE_ME_APAC_ID_eMP_10.01.11_001

Write : RM-1035_VIVA_eMP_10.01.11

CODE_DNLOAD : Ok

[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11

[VERIFY] DONE : RM-1035_LANG_PACK_ROM_ME_eMP_10.01.11_001

[VERIFY] DONE : RM-1035_CUSTPACK_ROM_ME_APAC_ID_eMP_10.01.11_001

[VERIFY] DONE : RM-1035_JUMP_TABLE_ME_APAC_ID_eMP_10.01.11_001

[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11

CODE_VERIFY : Ok

Executing FFS FORMAT now...

FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

DA_RET : DA_IN_PROGRESS

DA_RET : FORMAT_DONE

Rebooting phone now


Flashing done!

Total flash time : 00:00:55

Reboot phone Ok

Connect phone on selected interface...